0
Your Cart
0
Your Cart

SPECIFICATIONS

Application: Brush Cutters, Chainsaws, Cut-Off Machines,
Earth/Ice Augers, Edgers, Engine Drills,
Hedge & Weed Trimmers, Leaf Blowers,
Pole Pruners, Split-boom Products, Tillers
SAE Rating: N/A
Other Ratings: Meets ANSI B175.1 Annex D Standard UV Testing Tube: N/A
Reinforcement: N/A Cover: N/A
Temperature Range: 180F (82C) to -130F (-90C) Crimp Fittings: N/A
Reusable Fittings: N/A Specifications N/A
Literature: Tygon LP-1200 Tubing (PDF)
Other Features:
  • Transparent – Easy to diagnose fuel flow or leak problems
  • High purity fluoropolymer inner liner – Reduces the risk of fuel system fouling from extractable solids found in typical rubber products
  • Superior fuel resistance and compatible with ethanol-enhanced fuels – Worry-free operation
  • Excellent fitting retention – 100% seal for optimum safety
  • Superior flexibility – Easy assembly, routing and optimized fuel pick-up
  • Excellent elasticity – Prevents “necking” from over-stretching during installation
  • Submersible* – Applicable with most fuel applications*
  • *Not recommended for reuse in higher temperature applications
  • WARNING: Tygon LP-1200 Tubing is not intended as an implant material.
Part Number Inside Diameter (in.) Outside Diameter (in.) Wall Thickness (in.) Length Min. Bend Radius Max. Working Pressure Vacuum Rating
ALR00700 2/25″ 7/50″ 3/100″ 50ft 1/4″ 70 PSI 29.9 inHG
ALR00165 3/32″ 3/16″ 3/64″ 50ft 1/4″ 65 PSI 29.9 inHG
ALR00007 1/8″ 1/4″ 1/16″ 50ft 3/8″ 60 PSI 29.9 inHG
ALR00012 3/16″ 5/16″ 1/16″ 50ft 1/2″ 45 PSI 29.9 inHG
ALR00017 1/4″ 3/8″ 1/16″ 50ft 5/8″ 30 PSI 29.9 inHG

*Working Pressures are calculated at a 1:5 ratio relative to burst pressure using ASTM D1599.

The values listed for working and burst pressures are derived from tests conducted under controlled laboratory conditions. Many factors will reduce the tubing’s ability to withstand pressures, including temperature, chemical attack, stress, pulsation and the attachment to fittings. It is imperative that the user conduct tests simulating the conditions of the application prior to specifying the tubing for use.

Note: Every attempt has been taken to provide accurate detailed usable information online, however please consult Saint-Gobain Performance Plastics information documents for the most accurate and up to date data and specifics. Important! It is the user’s responsibility to ensure the suitability and safety of Saint-Gobain Performance Plastics tubing for all intended uses. Laboratory and clinical tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of tubing in any particular application. This product is priced and sold by Packaged Length. At this time, this particular hose is not available “by the foot” through our site.

Reviews

There are no reviews yet.

Be the first to review “ALR00012 Tygon by Saint Gobain | 3/16″ I.D. x 5/16″ OD x 1/16″ Wall | LP-1200 Series | EPA Compliant Fuel Tubing | 50ft Length”

Your email address will not be published. Required fields are marked *