| About: |
- The unique Everflex Conv-O-Crimp hose end are shipped with factory-installed Teflon fluoropolymer sleeves on the insert. This eliminates the timeconsuming, costly and subjective step of wrapping the hose end with Teflon fluoropolymer tape before assembly. The end result is a hose assemblysystem that is second to none in ease of assembly fabrication.
|
| WARNING: |
- Selection of the proper end fitting for the hose end application is essential to the proper operation and safe use of the hose andrelated equipment. Inadequate attention to the selection of the end fittings for your application can result in leaking or the hose end blowing offthe hose, leading to serious personal injury, death or property damage.
|
| Compatible Hose: |
|
|
|
Part Number
Insert: 316 S.S.
Nut & Collar: 304 S.S. |
Part Number
All Components: Carbon Steel |
Hose Size |
Hose ID |
Thread NPT |
Overall Length
A |
Hose Cut-Off Factor** |
Nominal ID |
| 12-112-A |
12-112-C |
-12 |
3/4″ |
3/4-14″ |
2.48″ |
1.38″ |
0.625″ |
| 16-116-A |
16-116-C |
-16 |
1″ |
1-11-1/2″ |
2.95″ |
1.76″ |
0.828″ |
| 20-120-A |
– |
-20 |
1-1/4″ |
1-1/4-11-1/2″ |
2.98″ |
1.79″ |
1.078″ |
| 24-124-A |
24-124-C |
-24 |
1-1/2″ |
1-1/2-11-1/2″ |
3.01″ |
1.82″ |
1.305″ |
| 32-132-A |
32-132-C |
-32 |
2″ |
2-11-1/2″ |
3.43″ |
1.98″ |
1.781″ |
** To determine the correct length of hose, subtract the cut-off factor for each end fitting from the overall length of assembly.
Note: Drawings may differ from actual parts.
Reviews
There are no reviews yet.