0
Your Cart
0
Your Cart

SPECIFICATIONS

Application: Cable Jacketing, Clean Liquids, Computer Manufacture, Fuel Lines(Small Motor),
Gases, Granular Materials, Grease & Lubrication Lines, Instrumentation, Insulation Sleeves,
Internal Contamination Fluids, Metering Pumps, Nuclear Power Facilities,
Pressure Measuring Devices, Robotics, Slurry Transfer, Vacuum Lines, Washers & Bumpers
Tube: Polyurethane
Reinforcement: Unreinforced Cover: N/A
Temperature Range: 185F Color: Clear
Opacity: Transparent Specifications Animal-Derived Ingredient Free, BPA Free,
Conflict Mineral Free, DEHP Free, FDA, Phthalate Free,
REACH, RoHS
Other Features:
  • Available in Ester or Ether formulations
  • Both formulations made from non-toxic raw materials conforming to FDA standards for use with wet and fatty food contact surfaces
  • Extremely resistant to weathering, tearing, impact, radiation, and abrasion
  • Transparent, flexible, resilient, tough; resistant to oils, greases, and fuels
  • Wide range of temperature resistance: -85F to 185F (ester)
  • Ether-based raw material is listed by the National Sanitation Foundation (NSF 61) for use with potable water
  • Ester-based raw material is free of animal derived components and REACH compliant
  • Free of DEHP, phthalates, BPA and conflict minerals
  • RoHS compliant
  • Can be heat sealed, coiled, fabricated, or bonded
  • Made in the USA
Notes:
  • Hydrolytic Stability – For resistance to moisture and fungi, SUPERTHANE ether is recommended. (Ester polyurethane does not react well with water, prolonged humid conditions, or attack from fungi.) The raw material used in its manufacture is listed by the National Sanitation Foundation (NSF 61).
  • SUPERTHANE is much more resistant to pressure and vacuum applications than corresponding sizes of PVC or rubber.
  • Although polyurethane is commonly used in fuel applications, due to additives in today’s gasoline and petroleum products, field testing should be performed.
  • When used with Thermobarb fittings, SUPERTHANE will not require clamps, provided that working pressures remain at or below 105 psi at ambient temperature.
  • For easy identification, SUPERTHANE is imprinted with the trademarked name.
Physical Properties**
ESTER ETHER
Hardness, Shore A 5 85 85
Tensile Strength, psi 6100 7500
Elongation at Break, % 490 500
Brittle Temperature -85F -85F
Max. Operating Temperature 185F 175F

**Values listed are typical and are meant only as a guide to aid in design. Field testing should be performed to find the actual values for the application.

Part Number Inside Diameter
(in.)
Outside Diameter
(in.)
Wall Thickness
(in.)
Length Working PSI (at 70F) Opacity Colors Weight
(lbs/100ft)
2000075-100 0.063″ 0.125″ 0.031″ 100 ft 135 PSI Transparent Clear 0.48 Lbs
2000152-100 0.125″ 0.188″ 0.031″ 100 ft 72 PSI Transparent Clear 0.79 Lbs
2000152-1000 0.125″ 0.188″ 0.031″ 1000 ft 72 PSI Transparent Clear 0.79 Lbs
2000229-100 0.125″ 0.250″ 0.063″ 100 ft 130 PSI Transparent Clear 1.92 Lbs
2000229-1500 0.125″ 0.250″ 0.063″ 1500 ft 130 PSI Transparent Clear 1.92 Lbs
2000383-500 0.170″ 0.250″ 0.040″ 500 ft 70 PSI Transparent Clear 1.37 Lbs
2000460-100 0.188″ 0.250″ 0.031″ 100 ft 27 PSI Transparent Clear 1.13 Lbs
2000537-100 0.188″ 0.313″ 0.063″ 100 ft 74 PSI Transparent Clear 2.55 Lbs
2000537-1000 0.188″ 0.313″ 0.063″ 1000 ft 74 PSI Transparent Clear 2.55 Lbs
2000768-100 0.250″ 0.313″ 0.031″ 100 ft 33 PSI Transparent Clear 1.42 Lbs
2000845-100 0.250″ 0.375″ 0.063″ 100 ft 67 PSI Transparent Clear 3.19 Lbs
2000845-1000 0.250″ 0.375″ 0.063″ 1000 ft 67 PSI Transparent Clear 3.19 Lbs
2000999-100 0.250″ 0.500″ 0.125″ 100 ft 131 PSI Transparent Clear 7.66 Lbs
2001076-100 0.313″ 0.438″ 0.063″ 100 ft 65 PSI Transparent Clear 3.83 Lbs
2001153-100 0.313″ 0.500″ 0.094″ 100 ft 75 PSI Transparent Clear 6.24 Lbs
2001230-100 0.313″ 0.563″ 0.125″ 100 ft 118 PSI Transparent Clear 8.93 Lbs
2001307-100 0.375″ 0.500″ 0.063″ 100 ft 59 PSI Transparent Clear 4.47 Lbs
2001384-100 0.375″ 0.563″ 0.094″ 100 ft 84 PSI Transparent Clear 7.16 Lbs
2001461-100 0.375″ 0.625″ 0.125″ 100 ft 100 PSI Transparent Clear 10.22 Lbs
2001615-100 0.438″ 0.688″ 0.125″ 100 ft 80 PSI Transparent Clear 11.48 Lbs
2001692-100 0.500″ 0.625″ 0.063″ 100 ft 36 PSI Transparent Clear 5.75 Lbs
2001846-50 0.500″ 0.750″ 0.125″ 50 ft 60 PSI Transparent Clear 12.77 Lbs
2001846-100 0.500″ 0.750″ 0.125″ 100 ft 60 PSI Transparent Clear 12.77 Lbs
2002000-100 0.625″ 0.813″ 0.094″ 100 ft 54 PSI Transparent Clear 10.98 Lbs
2002077-100 0.625″ 0.875″ 0.125″ 100 ft 60 PSI Transparent Clear 15.33 Lbs
2002231-50 0.750″ 1.000″ 0.125″ 50 ft 51 PSI Transparent Clear 17.88 Lbs
2002231-100 0.750″ 1.000″ 0.125″ 100 ft 51 PSI Transparent Clear 17.88 Lbs
2002385-100 0.875″ 1.125″ 0.125″ 100 ft 33 PSI Transparent Clear 20.43 Lbs
2002539-100 1.000″ 1.250″ 0.125″ 100 ft 40 PSI Transparent Clear 22.99 Lbs

Working pressures are calculated from burst testing using a 3:1 safety factor. Application testing is recommended.
Tolerances: ID & OD 3% but not less than .005″.

Reviews

There are no reviews yet.

Be the first to review “2002231-50 SUPERTHANE by NewAge | Polyurethane PU Tubing | Ester | 0.750″ ID x 1″ OD x 0.125″ Wall | Clear | 50ft”

Your email address will not be published. Required fields are marked *