0
Your Cart
0
Your Cart
Sale!

12097 by Midland | Inverted Flare Fitting | Plug | 5/8″ Male Inverted Flare | Brass

Original price was: $8.99.Current price is: $7.19.

-Decrease product quantity. +Increase product quantity.
SKU: SyTPRD2gymoB Category:

SPECIFICATIONS

Applications: Hydraulic brake, power steering, fuel lines and transmission cooler lines, LP and natural gas. Used With: Copper, brass, aluminum and steel hydraulic tubing that can be flared.
SAE Rating: SAE# 040109 Conformance: Meets specifications and standards of ASA, ASME, SAE and MS (Military Standards).
Vibration: Excellent resistance. Temperature Range: -65F to +250F (-53C to +121C) range at maximum operating pressures.
Advantages: Very low cost and reusable. Seats and threads are internal and protected. Compact, excellent vibration life. Short nut affords very close tube bends. Tolerance: +/- .03 on all dimensions.
Working Pressure Ranges:
  • Temperature and type of tubing used are important factors. However, the following table is a good guide for proper selection. Temperature 73F with copper tubing:
Assembly Instructions:
  • 1) Cut tubing to desired length. Make sure all burrs are removed and ends are cut square.
  • 2) Slide nut on tube. Threaded end “A” of nut must face out.
  • 3) Flare end of tube with a 450 flaring tool.
    • A) Measure flare diameter
    • B) Examine flare for excessive thin out.
    • C) On thin wall, welded or brazed tubing, use double flare to prevent pinch-off and cracked flares.
  • 4) Lubricate threads and assemble to fitting body. Nut should be turned hand tight.
Tube OD 1/8″ 3/16″ 1/4″ 5/16″ 3/8″ 7/16″ 1/2″ 5/8″ 3/4″ 7/8″ 1″
Thread OD
(Threads per inch)		 5/16-28 3/8-24 7/16-24 1/2-20 5/8-18 11/16-18 3/4-18 7/8-18 1-1/16-16 1-3/16-16 1-5/16-16
Standard Metric Threads:
Description
Tube Size		 Thread OD Crest
(Pitch)		 Thread
Description
Japanese 3/16″ 10mm 1.0mm M10 x 1.0
European 3/16″ 10mm 1.0mm M10 x 1.0
GM 6mm 12mm 1.0mm M12 x 1.0
Fuel 5/16″ 14mm 1.5mm M14 x 1.5
Fuel 3/8″ 16mm 1.5mm M16 x 1.5
Measuring Metric Threads: Measure the O.D. of the threads and the crest to crest distance (pitch) in millimeters between threads.
Crossover Series:
391N 391F 106 41IP 131 2131
Part Number Male Inverted Flare A Hex Approx. Weight
(Lbs.)
Steel
12091
(12-091)		 3/16″ 0.53″ 0.37″ 0.01
12092
(12-092)		 1/4″ 0.54″ 0.43″ 0.02
12093
(12-093)		 5/16″ 0.59″ 0.50″ 0.03
12094
(12-094)		 3/8″ 0.66″ 0.62″ 0.04
Brass
12095 3/8″ 0.66″ 0.63″ 0.04
12096 1/2″ 0.82″ 0.75″ 0.07
12097 5/8″ 0.90″ 0.87″ 0.10
12098 3/4″ 0.95″ 1.07″ 0.17

Reviews

There are no reviews yet.

Be the first to review “12097 by Midland | Inverted Flare Fitting | Plug | 5/8″ Male Inverted Flare | Brass”

Your email address will not be published. Required fields are marked *

Related products

  • Sale!

    9500-P-24 by Brennan Inc. | -24 Male BSPT Plug | Steel

    Original price was: $28.86.Current price is: $23.09.
  • Sale!

    9644-C-32 by Brennan Inc. | -32 Female BSPP Cap | Steel

    Original price was: $78.51.Current price is: $39.26.
  • Sale!

    N5406-P-20-SS by Brennan Inc. | -20 Male NPTF Hex Head Plug | Stainless Steel

    Original price was: $99.06.Current price is: $49.53.