Note: |
- Pressure: Determined by maximum working pressure for hose size.
- CAUTION: Sealing integrity may be damaged by the use of clamps.
- Label Set: FS-500
|
Material: |
|
Compatible Hose: |
- H100, H101, H201, H332, 35FH
|
Assembly instructions: |
- To determine the correct length of hose, subtract the cut-off factor for each end Fitting from the overall length of assembly.
- 1. Lubricate insert.
- 2. Hold hose at angle as shown and push on and up over first barb.
- 3. Continue to push straight on until hose is seated under protective plastic cap. (Keep hand back from hose end area so that hose can expand.)
- Assembly Lubricant:
- 1 Gallon: 222070-8
- 1 Pint: 222070
|
Disassembly instructions: |
- 1. Split hose as shown. Do not cut completely through hose. Sealing edge of barb could be damaged.
- 2. Bend hose and remove with quick pull.
|
|
Brass Part Number |
Hose I.D. |
Tube Size |
Thread Size |
A |
Hose Cut-off Factor |
Hole Diameter |
Hex E |
10006B-306 |
3/8″ |
3/8″ |
5/8-18 |
1.73″ |
1.00 |
0.297″ |
5/8″ |
Note: Drawings may differ from actual parts.
Reviews
There are no reviews yet.