0
Your Cart
0
Your Cart
Note:
  • Pressure: Determined by maximum working pressure for hose size.
  • CAUTION: Sealing integrity may be damaged by the use of clamps.
  • Label Set: FS-500
Material:
  • CA360 Brass
Compatible Hose:
  • H100, H101, H201, H332
Assembly instructions:
  • To determine the correct length of hose, subtract the cut-off factor for each end Fitting from the overall length of assembly.
  • 1. Lubricate insert.
  • 2. Hold hose at angle as shown and push on and up over first barb.
  • 3. Continue to push straight on until hose is seated under protective plastic cap. (Keep hand back from hose end area so that hose can expand.)
  • Assembly Lubricant:
    • 1 Gallon: 222070-8
    • 1 Pint: 222070
Disassembly instructions:
  • 1. Split hose as shown. Do not cut completely through hose. Sealing edge of barb could be damaged.
  • 2. Bend hose and remove with quick pull.
Brass
Part Number
Thread
Size
Hose
Size
10006B-C02 1/8-27 -06
10006B-C04 1/4-18 -06

Note: Drawings may differ from actual parts.

Reviews

There are no reviews yet.

Be the first to review “10006B-C04 Weatherhead by Danfoss | Male Pipe Rigid Field Attachable Push-On Fitting | 90 Elbow | 100 ‘B’ Series Barb-Tite | -04 Male NPTF x -06 Reusable Hose End | Brass”

Your email address will not be published. Required fields are marked *