0
Your Cart
0
Your Cart
Features:
  • High flow metal valves.
  • Precision molded seals form a “bubble tight” seal for reliable operation within rated working pressures. Nitrile (Buna-N) seals are standard. EPDM, Viton and Neoprene seals are available as options.
  • Proven ball locking mechanism with large numbers of stainless steel locking balls evenly distribute the load to resist wear and provide positive connections and allow a swiveling action to reduce hose torque.
  • Integral sleeve guard protects the sleeve and resists accidental disconnects for the “SG” series.
  • Knurling and/or grooves on the sleeve provide a gripping surface for ease of operation.
  • Wide range of body sizes, materials, options and end terminations are available to meet specific needs.
  • Accepts Industrial Interchange Plug.
  • Operation: Sleeve type couplings are widely used to connect air and low pressure fluid lines. Their compact and economical design uses a ball locking mechanism consisting of captive stainless steel balls that engage the locking groove on the mating plug. The sliding spring loaded sleeve on the socket must be manually retracted in order to connect or disconnect the plug.
  • Working Pressure: 300 PSIG; vacuum to 26″ Hg
  • Interchangeability: Complies with ANSI/NFPA T3.20.14-1990 & IS0 6150-B
Specifications Body Size
1/4″ 3/8″ 1/2″
Rated Pressure (psi) 300 300 300
Temp. Range (Buna-N Seal) -40 deg. to +250 deg. F
Locking Device Stainless Steel Balls
Vacuum Data (inches Hg)
— Disconnected (coupler only) Not Recommended
— Connected 27.4 27.4 27.4
Approximate CFM at 100 (psi) 37 70 150
Female CouplerPart Number Male PlugPart Number Size Description Drawing
2022 02-2 1/8″ Brass/Steel 2022.pdf
BL2022 1/8″ Ball Lock N/A
2022W 1/8″ For Water, Brass/SS, Buna-N Seal 2022W.pdf
2032 03-2 3/16″ Brass/Steel 2032.pdf
BL2032 3/16″ Ball Lock N/A
2032HW 3/16″ For Hot Water, Brass/SS, Viton Seal 2032HW.pdf
2032S 3/16″ For Steam, Brass/SS, EPDM Seal 2032S.pdf
2042 04-2 1/4″ Brass/Steel 2042.pdf
BL2042 1/4″ Ball Lock N/A
2042HW 1/4″ For Hot Water, Brass/SS, Viton Seal 2042HW.pdf

Reviews

There are no reviews yet.

Be the first to review “2042 by ZSi-Foster | Quick Disconnect Socket | 1/4″ ID | Hose Stem | Brass/Steel”

Your email address will not be published. Required fields are marked *