0
Your Cart
0
Your Cart
Features:
  • Safety sleeve lock prevents accidental disconnections.
  • Non-Interchangeable design prevents crossing of lines.
  • Color coded sleeves for easy identification: 600 green, 700 red.
  • Designed for use with compressed air and other gases.
Applications & Markets:
  • Breathing Equipment
  • Welding
  • Shipyards
  • General pneumatics
  • Construction
  • Nitrous Oxide
Materials:
  • Standard body material: Brass
  • Standard seal material: Buna-N
Specifications:
  • Series 600 and 700 couplings with sleeve lock feature comply with OSHA requirements,* which state couplings shall be a type that cannot be unlockedor disconnected by means of straight pull without rotary motion.
  • * Series 600 and 700 couplings with sleeve lock feature comply with O.S.H.A. requirements, Sec. 1915.35 (f)(5), 1916.35 (f)(5), 1917.35 (f)(5), and 1926.350 (f)(5).
Warning:
  • Series 600 couplings are not to be used with oxygen at pressures exceeding 100 psig.
  • Oxygen increases combustibility. Fire and explosion could occur causing severe bodily injury or death. Be sure to select the proper coupling for your application and use itonly within the specified service pressure range.
Series Body Size Max. Operating Pressure Min. Burst Pressure Rated Flow
600 & 700 1/4″ 103 bar 1,500 psi 412 bar 6,000 psi 595 lpm 21 scfm
Socket/Female (Figure 1) Hose Barb Ends (Figure 1A) Plug/Male (Figure 2)
600 Series | Hose Barb End Connections
Standard*
Part Number
Oxygen Service
Part Number
Coupling Type Body Size Hose ID End Type Figure Dimensions
A B C D
GR606 GR606SL Socket/Female 1/4″ 1/4″ Hose Barb 1 2.47″
(62.74mm)
1.00″
(25.40mm)
07A Plug/Male 1/4″ 1/4″ Hose Barb 2 2.03″
(51.56mm)
0.56″
(14.22mm)
GR606P GR606PSL Socket/Female 1/4″ 1/4″ Push-On Hose Barb 1, 1A 2.24″
(56.90mm)
1.00″
(25.40mm)
Plug/Male
GR607 GR607SL Socket/Female 1/4″ 5/16″ Hose Barb 1 2.47″
(62.74mm)
1.00″
(25.40mm)
08A Plug/Male 1/4″ 5/16″ Hose Barb 2 2.03″
(51.56mm)
0.56″
(14.22mm)
GR608 GR608SL Socket/Female 1/4″ 3/8″ Hose Barb 1 2.47″
(62.74mm)
1.00″
(25.40mm)
09A Plug/Male 1/4″ 3/8″ Hose Barb 2 2.04″
(51.82mm)
0.56″
(14.22mm)
GR608P Socket/Female 1/4″ 3/8″ Push-On Hose Barb 1, 1A 2.31″
(58.67mm)
1.00″
(25.40mm)
Plug/Male

* Without sleeve lock

Reviews

There are no reviews yet.

Be the first to review “08A Hansen by Danfoss | Quick Disconnect Coupling | 600 Series | Hose Barb End | 5/16″ Hose ID x 1/4″ Body Size | Standard Plug | Without Sleeve Lock | Buna-N Seal | Brass”

Your email address will not be published. Required fields are marked *